MTU 12 V 4000 M63 Especificaciones descargar pdf (Pagina 41)

Fuels 39

Designation Unit Limit Value Remarks

Fluorine

mg/m³

With higher values, consultation with

manufacturer and analysis are necessary

Chlorine + ﬂuorine mg/m³

10*

With higher values, consultation with

manufacturer and analysis are necessary

ppm

70*

With higher values, consultation with

manufacturer and analysis are necessary

* = a non-binding guideline value, where oxidation-type catalytic converters are in use.

Analysis and consultation with MTU necessary.

The limit values are based on a calori ﬁ c value of 10 kWh/m

. This corresponds to a reference

to fuels with 100% by vol. methane or, if there are other combustible elements in the fuel, an

equal energy equivalent and thus an equal input of pollutants.

Example:

Russian natural gas with a caloriﬁc value of 10 kWh/m

(Table 14) is used. The permissible value for total

sulfur in the gas thus corresponds exactly to the limit value speciﬁed in Table 16.

When using gas from Osthannover, for example, with Hu = 8.15 kWh/m

(Table 15) the

permissible max. value of total sulfur is calculated thus:

permissible total sulfur content = 30 mg/m³

(8.15 kWh/m

: 10.0 kWh/m

) = 24.5 mg/m³

No warranty is given in respect of impairment and / or damage (corrosion, contamination etc.)

resulting from gases or materials the presence of which was unknown and agreed upon on

conclusion of contract.

TIM ID: 0000010137 – 008

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 107 108

Sin comentarios

MTU 12 V 4000 M63 Especificaciones Pagina 41